Esoteric G-02X Owners Manual EN FR SP - Page 16
Setting mode continued, Preheating setting
View all Esoteric G-02X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setting mode (continued) Preheating setting PrHEAT>*** 10MHz OUT connector 1 output setting 10M_1>*** Use to turn ON/OFF preheating when the unit is off. Use to set the output for the 10MHz OUT 1 connector. oo Due to the nature of the crystal oscillator (OCXO), continuous operation stabilizes the precision of operation, so we recommend turning this ON. OFF The POWER button turns the crystal oscillator (OCXO) on/off with the unit. ON This turns the power for the crystal oscillator (OCXO) on regardless of the POWER button setting. This shortens the amount of time until the oscillator stabilizes after the unit is turned on. oo When the unit power is off, clock is not output even though the crystal oscillator (OCXO) is operating. oo If the crystal oscillator (OCXO) is always on, the unit will consume considerably more power when the unit is off. Reference clock setting ON This enables it. OFF This disables it. 10MHz OUT connector 2 output setting 10M_2>*** Use to set the output for the 10MHz OUT 2 connector. ON This enables it. OFF This disables it. MCK>*** OCXO The built-in crystal oscillator (OCXO) is used for the reference clock. EXT10M The 10MHz reference frequency input through the reference frequency input (EXT IN) connector is used for the reference clock. 10MHz OUT connector 3 output setting 10M_3>*** Use to set the output for the 10MHz OUT 3 connector. ON This enables it. OFF This disables it. 10MHz OUT connector 4 output setting 10M_4>*** Use to set the output for the 10MHz OUT 4 connector. ON This enables it. OFF This disables it. 16