Foxconn Z77A-S User manual - Page 107
Check that the SSD disk 1 partition becomes Hibernation Partition.
View all Foxconn Z77A-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
APPENDIX 5. In the diskpart prompt, input the following commands and press Enter to execute them: select disk 1 (MUST select SSD ONLY) create partition primary set id=84 override CAUTION All the data on the selected disk will be lost, you can backup them beforehand if necessary. 6. Check that the SSD (disk 1) partition becomes "Hibernation Partition". The hibernation partition of SSD must be larger than your system memory installed. 100
APPENDIX
100
5. In the diskpart prompt, input the following commands and press Enter to execute them:
select disk 1 (MUST select SSD ONLY)
create partition primary
set id=84 override
All the data on the selected disk will be lost, you can backup them beforehand if
necessary.
CAUTIO
N
6. Check that the SSD (disk 1) partition becomes “Hibernation Partition”.
The hibernation partition of SSD must be larger than your system memory installed.