Foxconn Z77A-S User manual - Page 36
delay is taken from hub descriptor., Manual]: you can change the time you want by the following item.
View all Foxconn Z77A-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
BIOS SETUP This item is used to select the USB mass storage device start unit command time-out. Default value is [20 sec]. ► Device power-up delay This item is used to set the maximum time the device will take before it can report itself to the host controller. [Auto] : This is default option. For a root port, the default time is 100ms. For a hub port, the delay is taken from hub descriptor. [Manual]: you can change the time you want by the following item. 29
BIOS SETUP
29
This item is used to select the USB mass storage device start unit command time-out.
Default value is [20 sec].
► Device power-up delay
This item is used to set the maximum time the device will take before it can report itself to the
host controller.
[Auto] : This is default option. For a root port, the default time is 100ms. For a hub port, the
delay is taken from hub descriptor.
[Manual]: you can change the time you want by the following item.