Home » Foxconn Manuals » Motherboards » Foxconn Z77A-S » Manual Viewer

Foxconn Z77A-S User manual - Page 97

Install a New Windows XP, to BIOS Setup

Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

RAID CONFIGURATION 5-7 Install a New Windows XP When set the SATA Mode in BIOS to either AHCI or RAID, you need to follow the following steps to install Windows OS. 1. Press to enter BIOS Setup during POST. 2. Insert the Windows installation CD into the optical drive. 3. Set the first Boot device to CD/DVD, save changes and exit the BIOS setup. (Please refer to Chapter 3 BIOS Setup) 4. The computer will reboot, and it will start installing Windows Operating System. Watch the screen carefully, when the following picture appears, press key immediately. If you forgot to do this, PC will go to an fatal blue screen, and you may need to reboot the system again. PC may not respond to your input immediately, and it keeps loading files until the next screen displays. Windows Setup Press F6 if you need to install a third party SCSI or RAID driver. 90

Section	Page
User’s Manual	1
Installation Precautions	5
Technical Support	5
Table of Contents	6
Chapter 1 Product Introduction	8
1-1 Product Specifications	9
1-2 Layout	11
1-3 Back Panel Connectors	12
Chapter 2 Hardware Installation	14
2-1 Install the CPU and CPU Cooler	15
Install the CPU	15
2-2 Install the Memory	18
Dual Channel Memory Configuration	18
Installing a Memory	19
2-3 Install an Expansion Card	20
2-4 Install other Internal Connectors	21
2-5 Clear CMOS	25
2-6 Onboard Button	25
2-7 Onboard Debug LED	26
Chapter 3 BIOS Setup	27
Enter BIOS Setup	28
Main	29
Advanced	30
Onboard Device Configuration	30
Chipset Configuration	31
PCI Express Settings	32
ACPI Configuration	33
SATA Configuration	34
USB Configuration	35
OC Plus	37
CPU Configuration	37
Memory Configuration	39
Voltage Configuration	40
Hardware Monitor	41
Boot	43
Security	44
Save & Exit	45
Chapter 4 CD Instruction	47
4-1 Install driver and utility	48
1. Install Driver	48
2. Install Utility	49
4-2 FOX ONE	50
1. Main Page	51
2. Limit Setting	54
3. Fan Page - Fan Control	57
4-3 FOX LiveUpdate	58
1. Local Update	58
2. Online Update	60
3. Configure	63
4. About & Help	65
4-3 FOX LOGO	66
4-4 FOX DMI	67
Chapter 5 RAID Configuration	68
5-1 RAID Configuration Introduction	69
5-2 Intel® Rapid Storage Technology	71
5-3 Steps to Install Serial ATA Hard Disks	71
5-4 Create a RAID driver diskette	72
5-5 BIOS Configuration	73
5-6 Create RAID in BIOS	73
1. Enter RAID BIOS Setup	73
2. Create RAID Volume	74
3. Delete RAID Volume	89
4. Reset Disks to Non-RAID	90
5. Recovery Volume Options	95
6. Exit RAID BIOS	96
5-7 Install a New Windows XP	97
Appendix	101
ATI® CrossFireXTM Technology	101
USB Charger Introduction	103
Intel® Smart Response Technology	104
System Requirements	104
Enable Intel® Smart Response Technology	104
Intel® Rapid Start Technology	106
System Requirements	106

Match case Limit results 1 per page

RAID CONFIGURATION

5-7 Install a New Windows XP

1. Press <DEL> to enter BIOS Setup during POST.

2. Insert the Windows installation CD into the optical drive.

3. Set the ﬁrst Boot device to CD/DVD, save changes and exit the BIOS setup. (Please refer

to Chapter 3 BIOS Setup)

4. The computer will reboot, and it will start installing Windows Operating System.

Watch the screen carefully, when the following picture appears, press <F6> key immediately.

If you forgot to do this, PC will go to an fatal blue screen, and you may need to reboot the

system again. PC may not respond to your <F6> input immediately, and it keeps loading ﬁles

until the next screen displays.

Windows Setup

Press F6 if you need to install a third party SCSI or RAID driver.

When set the SATA Mode in BIOS to either AHCI or RAID, you need to follow the

following steps to install Windows OS.