Garmin GPSMAP 76CSx Owner's Manual - Page 10
Initializing the GPS Receiver
UPC - 753759051648
View all Garmin GPSMAP 76CSx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Getting Started Turning on the GPSMAP 76CSx To turn the GPSMAP 76CSx on and off: Press and hold the POWER. Adjusting the Backlight To adjust the backlight level: 1. Press and quickly release the POWER key. 2. Press up on the ROCKER to increase the brightness, or press down to decrease. 3. Press ENTER or QUIT to close. See page 40 for information on changing the screen colors and backlight time out and brightness levels. Initializing the GPS Receiver The first time you turn on your unit, the GPS receiver must collect satellite data and establish its current location. To receive satellite signals, you should be outdoors and have a clear view of the sky. To initialize your GPSMAP 76CSx: Hold the unit in front of you facing the sky and observe the Satellite page. While the GPS receiver is searching for the satellite signals, a "Locating Satellites" message is replaced by an "Acquiring Satellites" message until a location fix is made. The outer circle represents the horizon. The inner circle is 45 degrees from the horizon. Heading bug indicates your direction The Strength of each satellite signal. Initialization Options If the unit cannot get a satellite fix, an options menu with a list of solutions appears. Highlight the appropriate solution and press ENTER. GPSMAP 76CSx Owner's Manual