Garmin GPSMAP 76CSx Owner's Manual - Page 8

Batteries, microSD Card, and Lanyard - owner s manual

Get Garmin GPSMAP 76CSx PDF manuals and user guides
UPC - 753759051648
View all Garmin GPSMAP 76CSx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Getting Started Batteries, microSD Card, and Lanyard The GPSMAP 76CSx operates on two AA batteries (not included), which are located in the back of the unit. You can use Alkaline, NiMH, or Lithium batteries. See page 40 for information on setting the battery type. To install the batteries: 1. Remove the battery cover by turning the D-ring 1/4 turn counter-clockwise and pulling the cover loose. 2. Insert the batteries, observing the proper polarity. 3. Reinstall the battery cover. Remove the batteries from your unit when you do not expect to use the unit for several months. Stored data is not lost when batteries are removed. microSD card slot (with microSD card in position for insertion)  MICRO SD CARD To install the microSD card: 1. Remove the battery cover by turning the D-ring 1/4 turn counter-clockwise and pulling the cover loose. 2. Locate the microSD card in the slot below the batteries and press down on the top edge of the card until you feel it click. Then gently allow the card to release. 3. Press down again to install the card, making certain the card is fully in place to prevent damage when reinstalling the battery cover. To install the lanyard: 1. Place the loop of the lanyard throught the slot at the base of the unit. 2. Route the strap through the loop, and pull tight. Install the carry lanyard in the slot at the bottom of the unit GPSMAP 76CSx Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
³
GPSMAP 76CSx Owner’s Manual
G
ETTING
S
TARTED
Batteries, microSD Card, and Lanyard
The GPSMAP 76CSx operates on two AA batteries
(not included), which are located in the back of
the unit. You can use Alkaline, NiMH, or Lithium
batteries. See
page 40
for information on setting the
battery type.
To install the batteries:
1. Remove the battery cover
by turning the D-ring 1/4
turn counter-clockwise and
pulling the cover loose.
2. Insert the batteries,
observing the proper
polarity.
3. Reinstall the battery cover.
Remove the batteries from your
unit when you do not expect to
use the unit for several months.
Stored data is not lost when
batteries are removed.
To install the microSD card:
1. Remove the battery cover by turning the D-ring
1/4 turn counter-clockwise and pulling the cover
loose.
2. Locate the microSD card in the slot below the
batteries and press down on the top edge of the
card until you feel it click. Then gently allow the
card to release.
3. Press down again to install
the card, making certain
the card is fully in place
to prevent damage when
reinstalling the battery
cover.
To install the lanyard:
1. Place the loop of the
lanyard throught the slot at
the base of the unit.
2. Route the strap through
the loop, and pull tight.
MICRO
SD
CARD
m±croSD card slot
(w±th m±croSD card ±n
pos±t±on for ±nsert±on)
Install the carry lanyard
±n the slot at the bottom
of the un±t