Gateway E-9422R Gateway E-9422R Server User Guide - Page 46

Caution, Important, If you are not replacing the PCI card or riser card

Get Gateway E-9422R PDF manuals and user guides View all Gateway E-9422R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

CHAPTER 4: Installing Components 4 Loosen the two thumbscrews (1) at the back of the chassis, push the release clips (2) in the direction shown in the illustration, then lift the assembly (3) out of the chassis. Caution Do not touch the contacts on the bottom part of the expansion card. Touching the contacts can cause electrostatic damage to the card. Important The system board shown in these instructions may be somewhat different than the system board installed in your server. 5 Place the PCI riser assembly on a stable, static-free surface, then loosen the screw (3) holding the card lock in place. 6 Open the card lock (4), then pull out the PCI card (5). If you are not replacing the PCI card or riser card, insert the slot cover into the back of the riser card assembly and go to Step 12. 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
CHAPTER 4: Installing Components
40
4
Loosen the two thumbscrews (1) at the back of the chassis, push the release clips (2) in the
direction shown in the illustration, then lift the assembly (3) out of the chassis.
5
Place the PCI riser assembly on a stable, static-free surface, then loosen the screw (3) holding
the card lock in place.
6
Open the card lock (4), then pull out the PCI card (5).
If you are not replacing the PCI card or riser card, insert the slot cover into the back of the
riser card assembly and go to
Step 12
.
Caution
Do not touch the contacts on the bottom part of the expansion card. Touching
the contacts can cause electrostatic damage to the card.
Important
The system board shown in these instructions may be somewhat different
than the system board installed in your server.