Gateway NX100 Gateway Notebook Reference Guide R2 for Windows XP - Page 75
Connect the optional port replicator., Insert the battery, then turn your notebook
View all Gateway NX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Adding or replacing memory modules 9 Pull the memory module out of the slot. Important Use only memory modules designed for your Gateway notebook. 10 Hold the replacement module at a 30-degree angle and slide it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. 11 Gently push the module down until it clicks in place. 12 Replace the memory bay cover, then tighten the captive screw. 13 Insert the battery, then turn your notebook over. 14 Connect the optional port replicator. -OR- Connect the power adapter, modem cable, and network cable. 15 Reconnect all peripheral devices and replace any PC cards. 69