Gigabyte M1305 Manual - Page 58

English 8.1 Troubleshooting Warning: Under the condition that you can't handle problems, please contact to your dealer to get professional assistance and service. AC Adapter Trouble Solution Make sure the AC adapter is well connected to the power source and Notebook. 48 No power supplied to Notebook Check the cable and plug to make sure they are OK. If they are broken, please contact your local dealer ASAP. Battery packr Trouble Solution No power supplied to Notebook The remaining power in battery pack may be not enough to power on the machine. Connect AC Adapter to recharge it. Check temperature of battery pack's surface. Battery pack can't be recharged if its tempera¬ture is too high or too low. Recharge it only after its temperature is the same with the Can't be recharged nor¬mal environment one. after connecting AC Adapter If battery pack is fully discharged, it won't be recharged at once. Please wait for a few some minutes. If the power indicators of the battery pack are always not lit up, its life may be over. Please contact your dealer to buy another one. Battery life is not as long as it should be Battery life depends on usage conditions of the Notebook. You can change the set¬tings in the Power Manager of the OS to save power. Battery pack can't exert its full capacity if it works when not fully recharged frequently. Power Notebook by battery pack until its power drops to a critically low level and the machine emits a high-pitched beep or displays a warning message; after that, recharge bat¬tery packs to make battery pack work longer. WARNING: Please pay attention to the following information regarding the battery pack: 1. Be sure to recycle the waste batteries property. 2. Do not place the batteries near high-temperature locations, fire source or in burning fire as this may cause the batteries to explode 3. Do not assemble/disassemble /modify the batteries without authorization. 4. Use the battery pack provided by the original manufacturer only. Batteries other than those supplied by the original manufacturer may damage the device. Keyboard Trouble Solution Press character keys but number displayed Check if Num Lock is activated. instead of character Confusing display Make sure there is no software to configure the keyboard.