Haier QFD15ESSNWW Installation Instructions - Page 21
Side Or Bottom Venting, Side Or Bottom Venting Cont.
![]() |
View all Haier QFD15ESSNWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
ENGLISH INSTALLATION INSTRUCTIONS EXHAUSTING THE DRYER (cont.) SIDE OR BOTTOM VENTING WARNING - Fire Hazard Disconnect dryer from electrical supply. Wear gloves and arm guards. Close the back opening with cover plate (Kit WE49X22606). Failure to do so may result in fire, electrical shock or lacerations. Remove screw and save Right Left Bottom Remove desired knockout (one only) Detach and remove the right, left or bottom knockout as desired. Remove the screw inside the dryer exhaust duct and save. Pull the duct out of the dryer. Cut the duct as shown and keep portion A. Fixing hole SIDE OR BOTTOM VENTING (cont.) ADDING A NEW DUCT Portion "A" Fixing hole Right Right or left side exhaust Left Reconnect the cut portion (A) of the duct to the blower housing. Make sure that the shortened duct is aligned with the tab in the base. Use the screw saved previously to secure the duct in place through the tab on the appliance base. ADDING ELBOW AND DUCT FOR EXHAUST TO RIGHT OR LEFT SIDE OF CABINET Right Exhaust can be added to right or left side Left Duct tape A 9" (22.86cm) • Preassemble 4" elbow with 4" duct. Wrap duct tape around joint. opening and connect the elbow to the dryer internal duct. Be sure not to pull or damage the electrical wires inside the dryer when inserting the duct. 49-3000195 21
![](/manual_guide/products/haier-qfd15essnww-installation-instructions-87bc5d1/21.png)