Haier QFD15ESSNWW Installation Instructions - Page 22
Side Or Bottom Venting Cont.
View all Haier QFD15ESSNWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ENGLISH INSTALLATION INSTRUCTIONS EXHAUSTING THE DRYER (cont.) SIDE OR BOTTOM VENTING (cont.) ADDING ELBOW AND DUCT FOR EXHAUST TO LEFT OR RIGHT SIDE OF CABINET (cont.) • Apply duct tape as shown DUCT on the joint between the TAPE dryer internal duct and the elbow, and also the joint between the elbow and the side duct. Use 4" rigid metal ducting only inside the dryer. Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard. ADDING ELBOW FOR EXHAUST THROUGH BOTTOM OF CABINET • Insert the elbow through the rear opening and connect it to the dryer internal duct. • Apply duct tape as shown on the joint between the dryer internal duct and the elbow, and also the joint between the elbow and the bottom duct. Duct tape Internal duct joints must be secured with tape; otherwise, they may separate and cause a safety hazard. SIDE OR BOTTOM VENTING (cont.) ADDING COVER PLATE TO REAR OF CABINET Plate (Kit WE49X22606) Connect standard metal elbows and ducts to complete the exhaust system. Cover back opening with the plate (kit WE49X22606) which can be purchased from haierappliances.com/parts or in Canada visit haiercanada.ca/parts. It may also be obtained from a local service provider. Place dryer in final location. NEVER LEAVE THE BACK OPENING WITHOUT THE PLATE. 22 49-3000195