Hayward Variable Speed Pump Owners Manual - Page 23

6.8. Preset Speed Setup Menu Screen 1. Speeds Menu Press > to enter Buttons Used Comments Use > to enter Speeds Menu 2. Speed 1 Name Speed 1 +- Use to rename displayed speed Move to next menu item 3. Speed 1 Duration 0:30 hours +- Use to set duration of speed Move to next menu item Note: Each time a preset speed is selected, it will run for the programmed duration. Multiple presses of the speed button will add more time according to the set duration up to a maximum of 12 hours. 4. Speed 1 Speed 1725 (600-3450rpm) +- Use to set motor speed for displayed speed Move to next menu item Note: Preset Speed settings can also be quickly updated without entering the Speeds Menu using the + and - arrow buttons to change the speed and then pressing the > button to save the new speed setting. 6.9. Diagnostic Menu Screen 1. Diagnostic Menu Press > to enter Buttons Used Comments Use > to enter Diagnostic Menu and toggle between displays 2. Serial Number 03100002 Displays motor drive serial number. 3. Drive Rev: 1.05 Display Rev: 2.62 Displays drive board and display board firmware revisions. 4. Product Version SP3400VSP Displays pump SKU. For SP3400VSPVR, displays SVRS revision and current status of SVRS protection. 5. Input Voltage Within Range Real-time display of line voltage status connected to drive (within range, too high, or too low). 6. Motor Current 1.1A (0-13.0A) Real-time display of motor input current. 7. Power Usage 225W (0-2650W) Real-time display of pump power usage. Page 23 of 36 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS EcoStar Variable Speed Pump IS3401VSP Rev-2