HP 1018 HP LaserJet 1018 - User Guide - Page 28
Guidelines for using media, Paper - ink
UPC - 882780435094
View all HP 1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Guidelines for using media The following sections provide guidelines and instructions for printing on transparencies, envelopes, and other special media. Guidelines and specifications are included to help you select media that optimizes print quality and avoid media that might cause jams or damage the printer. Paper For best results, use conventional 75 g/m2 (20 lb) paper. Make sure that the paper is of good quality and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges. If you are unsure about what type of paper you are loading (such as bond or recycled), check the label on the package of paper. Some paper causes print quality problems, jamming, or damage to the printer. NOTE Paper usage Symptom Poor print quality or toner adhesion Problems with feeding Problem with paper Too moist, too rough, too smooth, or embossed Faulty paper lot Dropouts, jamming, or curl Increased gray background shading Excessive curl Problems with feeding Stored improperly Might be too heavy Too moist, wrong grain direction, or short-grain construction Jamming or damage to printer Cutouts or perforations Problems with feeding Ragged edges Solution Try another kind of paper between 100-250 Sheffield and 4-6% moisture content. Check the printer and make sure that the appropriate media type has been selected. Store paper flat in its moistureproof wrapping. Use lighter paper. Use long-grain paper. Check the printer and make sure that the appropriate media type has been selected. Do not use paper with cutouts or perforations. Use good quality paper. The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with the printer temperature. The printer's maximum temperature is 200°C (392°F) for 0.1 second. Do not use letterhead that is printed with low-temperature inks, such as those used in some types of thermography. Do not use raised letterhead. Do not use transparencies designed for Inkjet printers or other low-temperature printers. Use only transparencies that are specified for use with HP LaserJet printers. 20 Chapter 2 Printing tasks ENWW