HP 1018 HP LaserJet 1018 - User Guide - Page 70
Printed is different than what appeared on screen, Garbled, incorrect, or incomplete text - usb cable
UPC - 882780435094
View all HP 1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Printed page is different than what appeared on screen NOTE Choose the item that best describes the problem: ● Garbled, incorrect, or incomplete text ● Missing graphics or text, or blank pages ● Page format is different than on another printer ● Graphics quality To preview a print job, use the Print Preview option in the software application (if available). WARNING! Garbled, incorrect, or incomplete text ● If a specific file prints garbled text, there might be a problem with that specific file. If a specific application prints garbled text, there might be a problem with that application. Make sure that the appropriate printer driver is selected. ● There might be a problem with your software application. Try printing from another software application. ● The USB cable might be loose or defective. Try the following: Before you connect the USB cable to the printer, always unplug the printer to prevent damage to the printer. ● Disconnect the cable and reconnect it at both ends. ● Try printing a job that you know works. ● If possible, attach the cable and printer to another computer, and try printing a job that you know works. ● Turn off the printer and the computer. Remove the USB cable, and inspect both ends of the cable for damage. Reconnect the USB cable, making sure that the connections are tight. Make sure that the printer is directly connected to the computer. Remove any switchboxes, tape backup drives, security keys, or any other devices that are attached between the USB port on the computer and the printer. These devices can sometimes interfere with communication between the computer and the printer. Restart the printer and the computer. Missing graphics or text, or blank pages ● Make sure that your file does not contain blank pages. ● The sealing tape might still be in the print cartridge. Remove the print cartridge, and pull the tab on the end of the cartridge until the entire length of the tape is removed. Reinstall the print cartridge. See Changing the print cartridge for instructions. ● The graphic settings in the printer properties might not be correct for the type of job that you are printing. Try a different graphic setting in the printer properties. See Printer properties (driver) for more information. ● Clean the printer, particularly the contacts between the print cartridge and the power supply. 62 Chapter 4 Problem solving ENWW