HP 10642 HP 10000 G2 Series Rack Options Installation Guide - Page 50
Lift the door up and out of the bottom hinge.
![]() |
View all HP 10642 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
a. Unlock and open the front door. b. Lift the top hinge pin up, and tilt the door away from the rack. c. Lift the door up and out of the bottom hinge. 2. Insert an M6 T-25 Torx screw through one end of a 15.24-cm (6-in) grounding strap, and insert it in the second hole below the upper front door hinge on the vertical frame member of the rack. Tighten the screw. 3. Replace the rack front door. Ground Bonding kit 50
![](/manual_guide/products/hewlettpackard-10636-hp-10000-g2-series-rack-options-installation-guide-d108d9f/50.png)
Ground Bonding kit 50
a.
Unlock and open the front door.
b.
Lift the top hinge pin up, and tilt the door away from the rack.
c.
Lift the door up and out of the bottom hinge.
2.
Insert an M6 T-25 Torx screw through one end of a 15.24-cm (6-in) grounding strap, and insert it in the
second hole below the upper front door hinge on the vertical frame member of the rack. Tighten the
screw.
3.
Replace the rack front door.