HP 10642 HP 10000 G2 Series Rack Options Installation Guide - Page 70
Insert and partially tighten two M8 x16-mm bolts with washers on each side of the caster plate skirt
View all HP 10642 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
b. Insert and partially tighten four M8 x16-mm bolts with washers, securing the front stabilizer mount to the front caster plate. c. Insert and partially tighten two M8 x16-mm bolts with washers on each side of the caster plate skirt, securing the front stabilizer mount to the front caster plate. d. Tighten the bolts from step b. e. Tighten the bolts from step c. Heavy Duty Stabilizer kit 70
Heavy Duty Stabilizer kit
70
b.
Insert and partially tighten four M8 x16-mm bolts with washers, securing the front stabilizer mount
to the front caster plate.
c.
Insert and partially tighten two M8 x16-mm bolts with washers on each side of the caster plate skirt,
securing the front stabilizer mount to the front caster plate.
d.
Tighten the bolts from step b.
e.
Tighten the bolts from step c.