HP 10642 HP 10000 G2 Series Rack Options Installation Guide - Page 91

Installing the airflow gasket, Insert two 10-mm plastic tree fasteners into the two rear holes

Get HP 10642 PDF manuals and user guides View all HP 10642 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

3. Insert the right side plate into the rack, overlapping the left side plate, and set it on the lip of the rack frame (3). 4. Using a T-25 Torx screwdriver, insert and tighten one M5.5 self-tapping screw at the rear, right corner and one M5.5 self-tapping screw at the front, right corner to secure the right side plate to the rack frame (4). 5. From the rear of the rack, align the two egress cover plates with the egress slot at the rear of the rack (1). 6. Secure the egress cover slot. a. Insert two 10-mm plastic tree fasteners into the two rear holes, through the caster plate (2). b. Insert two 6-mm plastic push fasteners into the two front holes, through the base plate (3). Installing the airflow gasket 1. Using scissors, cut the airflow rail gasket to fit the size of your rack. 2. Insert the airflow rail gasket into the rack front door on both sides of the rack. Rack Air Duct kit 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
Rack Air Duct kit
91
3.
Insert the right side plate into the rack, overlapping the left side plate, and set it on the lip of the rack
frame (3).
4.
Using a T-25 Torx screwdriver, insert and tighten one M5.5 self-tapping screw at the rear, right corner
and one M5.5 self-tapping screw at the front, right corner to secure the right side plate to the rack frame
(4).
5.
From the rear of the rack, align the two egress cover plates with the egress slot at the rear of the rack (1).
6.
Secure the egress cover slot.
a.
Insert two 10-mm plastic tree fasteners into the two rear holes, through the caster plate (2).
b.
Insert two 6-mm plastic push fasteners into the two front holes, through the base plate (3).
Installing the airflow gasket
1.
Using scissors, cut the airflow rail gasket to fit the size of your rack.
2.
Insert the airflow rail gasket into the rack front door on both sides of the rack.