HP 175X HP Jetdirect 175x Print Server - (English) User Guide - Page 62
x, 310x Troubleshooting: Cold Reset - jetdirect user manual
UPC - 882780301092
View all HP 175X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Resetting print server to factory defaults (cold reset) for HP Jetdirect 175x external print server/Internet connector for USB and HP Jetdirect 310x external print server/Internet connector for USB Once you configure the HP print server, the configuration settings are retained in memory unless you manually reset them to factory defaults. To reset the print server configuration to factory defaults, follow these steps: 1. Unplug the power module from the back of the print server. 2. While holding down the test button on the back of the print server, plug the power module back into the print server and continue to hold down the test button seconds. Any user-configured settings will be erased. button for about five When the procedure is done, the print server responds exactly like it was fresh from the factory. ©2000, 2001 Hewlett-Packard Company