HP 4315 User Guide - Page 75
Clean the white strip - officejet power cord
View all HP 4315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Maintain the HP All-in-One Chapter 9 3. Clean the glass strip with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner. Caution Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the device. 4. Close the automatic document feeder cover. 5. Plug in the power cord, and then turn on the HP All-in-One. Caution Make sure you close the automatic document feeder cover before loading any paper or originals. If you do not close the cover, you might damage the mechanism. Clean the white strip Minor debris can accumulate on the white strip located inside the automatic document feeder. To clean the white strip 1. Turn off the HP All-in-One, and unplug the power cord. Note Depending how long the HP All-in-One is unplugged, the date and time might be erased. You might need to reset the date and time later, when you plug the power cord back in. 2. Lift the cover of the automatic document feeder. 72 HP Officejet 4300 All-in-One series