HP 6120XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 13
General Setup Procedure for 802.1X Access Control, Configuring Switch Ports as 802.1X Authenticators
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Terminology 10-6 General 802.1X Authenticator Operation 10-9 Example of the Authentication Process 10-9 VLAN Membership Priority 10-10 General Operating Rules and Notes 10-12 General Setup Procedure for 802.1X Access Control 10-14 Do These Steps Before You Configure 802.1X Operation 10-14 Overview: Configuring 802.1X Authentication on the Switch . . . . . 10-17 Configuring Switch Ports as 802.1X Authenticators 10-18 1. Enable 802.1X Authentication on Selected Ports 10-19 A. Enable the Selected Ports as Authenticators and Enable the (Default) Port-Based Authentication 10-19 B. Specify User-Based Authentication or Return to Port-Based Authentication 10-20 Example: Configuring User-Based 802.1X Authentication . . . . 10-21 Example: Configuring Port-Based 802.1X Authentication . . . . 10-21 2. Reconfigure Settings for Port-Access 10-21 3. Configure the 802.1X Authentication Method 10-24 4. Enter the RADIUS Host IP Address(es 10-25 5. Enable 802.1X Authentication on the Switch 10-25 6. Optional: Reset Authenticator Operation 10-26 7. Optional: Configure 802.1X Controlled Directions 10-26 Wake-on-LAN Traffic 10-27 Operating Notes 10-27 Example: Configuring 802.1X Controlled Directions 10-28 802.1X Open VLAN Mode 10-29 Introduction 10-29 VLAN Membership Priorities 10-30 Use Models for 802.1X Open VLAN Modes 10-31 Operating Rules for Authorized-Client and Unauthorized-Client VLANs 10-36 Setting Up and Configuring 802.1X Open VLAN Mode 10-40 802.1X Open VLAN Operating Notes 10-44 Option For Authenticator Ports: Configure Port-Security To Allow Only 802.1X-Authenticated Devices 10-45 xii