HP 6120XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 34
Web: Management Interface Wizard, Enter, CTRL-C, password, Security, Setup Wizard
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Security Overview Getting Started with Access Security 2. When you enter the wizard, you have the following options: • To update a setting, type in a new value, or press [Enter] to keep the current value. • To quit the wizard without saving any changes, press [CTRL-C] at any time. • To access online Help for any option, press [?]. After you have gone through each setup option, the wizard displays the summary configuration together with a prompt to save the changes (see Figure 1-1 on page 1-11 for an example). 3. When the message appears asking if you want to save these changes, you have the following options: • To save your changes, press [Enter]. • To cancel any changes without saving, type [n] and then press [Enter]. After pressing [Enter], the wizard exits to the command line prompt. CLI Wizard: Operating Notes and Restrictions. ■ Once a password has been configured on the switch, you cannot remove it using the CLI wizard. Passwords can be removed by executing the no password command directly from the CLI. ■ When you restrict SNMP access to SNMPv3 only, the options SNMPv2 community name and access level will not appear. ■ The wizard displays the first available SNMPv2 community and allows the user to modify the first community access parameters. ■ The wizard creates a new SNMP community only when no communities have been configured on the switch. Web: Management Interface Wizard To use the Management Interface wizard from the Web browser interface, follow the steps below: 1. Click the Security tab. 2. Click the Setup Wizard button. 1-12