HP 6120XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 302
Verifying the Dynamic IP Lockdown Configuration, Adding a Static Binding
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 302 highlights
Note Configuring Advanced Threat Protection Dynamic IP Lockdown Adding a Static Binding To add the static configuration of an IP-to-MAC binding for a port to the lease database, enter the ip source-binding command at the global configuration level. Use the no form of the command to remove the IP-to-MAC binding from the database. Syntax: [no] ip source-binding vlan-id Specifies a valid VLAN ID number to bind with the specified MAC and IP addresses on the port in the DHCP binding database. ip-address Specifies a valid client IP address to bind with a VLAN and MAC address on the port in the DHCP binding database. mac-address Specifies a valid client MAC address to bind with a VLAN and IP address on the port in the DHCP binding database. port-number Specifies the port number on which the IP-toMAC address and VLAN binding is configured in the DHCP binding database. Note that the ip source-binding command is the same command used by the Dynamic ARP Protection feature to configure static bindings. The Dynamic ARP Protection and Dynamic IP Lockdown features share a common list of source IP-to-MAC address bindings. Verifying the Dynamic IP Lockdown Configuration To display the ports on which dynamic IP lockdown is configured, enter the show ip source-lockdown status command at the global configuration level. Syntax: show ip source-lockdown status 8-29