HP 6120XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 207
key < key-string >], Accounting types, Trigger for sending accounting reports to a RADIUS server
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
RADIUS Authentication, Authorization, and Accounting Configuring RADIUS Accounting must match the encryption key used on the specified RADIUS server. For more information, refer to the "[key < key-string >]" parameter on page 5-14. (Default: null) 2. Configure accounting types and the controls for sending reports to the RADIUS server. • Accounting types: exec (page 5-38), network (page 5-37), commands (page 5-38), or system (page 5-38) • Trigger for sending accounting reports to a RADIUS server: At session start and stop or only at session stop 3. (Optional) Configure session blocking and interim updating options • Updating: Periodically update the accounting data for sessions-inprogress • Suppress accounting: Block the accounting session for any unknown user with no username access to the switch 1. Configure the Switch To Access a RADIUS Server Before you configure the actual accounting parameters, you should first configure the switch to use a RADIUS server. This is the same as the process described on page 5-14. You need to repeat this step here only if you have not yet configured the switch to use a RADIUS server, your server data has changed, or you need to specify a non-default UDP destination port for accounting requests. Note that switch operation expects a RADIUS server to accommodate both authentication and accounting. Syntax: [no] radius-server host < ip-address > [oobm] Adds a server to the RADIUS configuration or (with no) deletes a server from the configuration. For switches that have a separate out-of-band management port, the oobm parameter specifies that the RADIUS traffic will go through the out-of-band management (OOBM) port. [acct-port < port-number >] Optional. Changes the UDP destination port for accounting requests to the specified RADIUS server. If you do not use this option, the switch automatically assigns the default accounting port number. (Default: 1813) 5-40