HP 6120XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 247

Configuring Secure Shell (SSH) Further Information on SSH Client Public-Key Authentication 2. Copy the client's public key into a text file (filename.txt). (For example, you can use the Notepad editor included with the Microsoft® Windows® software. If you want several clients to use client public-key authentication, copy a public key for each of these clients (up to ten) into the file. Each key should be separated from the preceding key by a . 3. Copy the client-public-key file into a TFTP server accessible to the switch. Copying a client-public-key into the switch requires the following: ■ One or more client-generated public keys. Refer to the documentation provided with your SSH client application. ■ A copy of each client public key (up to ten) stored in a single text file or individually on a TFTP server to which the switch has access. Terminate all client public-keys in the file except the last one with a . Note on Public Keys The actual content of a public key entry in a public key file is determined by the SSH client application generating the key. (Although you can manually add or edit any comments the client application adds to the end of the key, such as the [email protected] at the end of the key in figure 6-13 on page 6-26.) Syntax: copy tftp pub-key-file [] [oobm] Copies a public key file from a TFTP server into flash memory in the switch. The append option adds the key(s) for operator access. The manager option replaces the key(s) for manager access; follow with the 'append' option to add the key(s). 6-27