HP 6120XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 57
X Port-Access Credentials,
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Configuring Username and Password Security Saving Security Credentials in a Config File [priv ] is the (optional) hashed privacy password used by a privacy protocol to encrypt SNMPv3 messages between the switch and the station. The following example shows the additional security credentials for SNMPv3 users that can be saved in a running-config file: snmpv3 user boris \ auth md5 "9e4cfef901f21cf9d21079debeca453" \ priv "82ca4dc99e782db1a1e914f5d8f16824" snmpv3 user alan \ auth sha "8db06202b8f293e9bc0c00ac98cf91099708ecdf" \ priv "5bc4313e9fd7c2953aaea9406764fe8bb629a538" Figure 2-4. Example of Security Credentials Saved in the Running-Config Although you can enter an SNMPv3 authentication or privacy password in either clear ASCII text or the SHA-1 hash of the password, the password is displayed and saved in a configuration file only in hashed format, as shown in the preceding example. For more information about the configuration of SNMP security parameters, refer to the chapter on "Configuring for Network Management Applications" in the Management and Configuration Guide for your switch. 802.1X Port-Access Credentials 802.1X authenticator (port-access) credentials can be stored in a configuration file. 802.1X authenticator credentials are used by a port to authenticate supplicants requesting a point-to-point connection to the switch. 802.1X supplicant credentials are used by the switch to establish a point-topoint connection to a port on another 802.1X-aware switch. Only 802.1X authenticator credentials are stored in a configuration file. For information about how to use 802.1X on the switch both as an authenticator and a supplicant, see "Configuring Port-Based and Client-Based Access Control (802.1X)" in this guide. The local password configured with the password command is no longer accepted as an 802.1X authenticator credential. A new configuration command (password port-access) is introduced to configure the local operator username and password used as 802.1X authentication credentials for access to the switch. 2-14