HP 6120XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 271
Using the CLI Interface to Enable SSL, web-management ssl, Apply Changes]
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
Configuring Secure Socket Layer (SSL) Configuring the Switch for SSL Operation Using the CLI Interface to Enable SSL Syntax: [no] web-management ssl Enables or disables SSL on the switch. [port < 1-65535 | default:443 >] The TCP port number for SSL connections (default: 443). Important: See "Note on Port Number" on page 7-20. show config Shows status of the SSL server. When enabled webmanagement ssl will be present in the config list. To enable SSL on the switch 1. Generate a Host certificate if you have not already done so. (Refer to "2. Generating the Switch's Server Host Certificate" on page 7-8.) 2. Execute the web-management ssl command. To disable SSL on the switch, do either of the following: ■ Execute no web-management ssl. ■ Zeroize the switch's host certificate or certificate key. (page 7-9). Using the Web Browser Interface to Enable SSL To enable SSL on the switch i. Proceed to the Security tab then the SSL button ii. Select SSL Enable to on and enter the TCP port you desire to connect on. iii. Click on the [Apply Changes] button to enable SSL on the port. To disable SSL on the switch, do either of the following: i. Proceed to the Security tab then the SSL button ii. Select SSL Enable to off . iii. Click on the [Apply Changes] button to enable SSL on the port. 7-19