HP 6120XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 160
Configuring the Timeout Period., Procurveconfig# tacacs-server key <keystring>
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Note Note TACACS+ Authentication Configuring TACACS+ on the Switch To delete a per-server encryption key in the switch, re-enter the tacacs-server host command without the key parameter. For example, if you have north01 configured as the encryption key for a TACACS+ server with an IP address of 10.28.227.104 and you want to eliminate the key, you would use this command: ProCurve(config)# tacacs-server host 10.28.227.104 You can save the encryption key in a configuration file by entering this command: Procurve(config)# tacacs-server key The parameter is the encryption key in clear text. The show tacacs command lists the global encryption key, if configured. However, to view any configured per-server encryption keys, you must use show config or show config running (if you have made TACACS+ configuration changes without executing write mem). Configuring the Timeout Period. The timeout period specifies how long the switch waits for a response to an authentication request from a TACACS+ server before either sending a new request to the next server in the switch's Server IP Address list or using the local authentication option. For example, to change the timeout period from 5 seconds (the default) to 3 seconds: ProCurve(config)# tacacs-server timeout 3 4-23