HP 6120XG HP ProCurve Series 6120 Blade Switches Access Security Guide - Page 249
Example of Copying and Displaying a Client Public-Key File Containing Two Different Client
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Configuring Secure Shell (SSH) Further Information on SSH Client Public-Key Authentication For example, if you wanted to copy a client public-key file named clientkeys.txt from a TFTP server at 10.38.252.195 and then display the file contents: Key Index Number Figure 6-14. Example of Copying and Displaying a Client Public-Key File Containing Two Different Client Public Keys for the Same Client Replacing or Clearing the Public Key File. The client public-key file remains in the switch's flash memory even if you erase the startup-config file, reset the switch, or reboot the switch. ■ You can remove the existing client public-key file or specific keys by executing the clear crypto public-key command. This clears the public keys from both management modules. The module that is not active must be in standby mode. Syntax: clear crypto public-key Deletes the client-public-key file from the switch. Syntax: clear crypto public-key 3 Deletes the entry with an index of 3 from the client-public-key file on the switch. Enabling Client Public-Key Authentication. After you TFTP a clientpublic-key file into the switch (described above), you can configure the switch to allow the following: ■ If an SSH client's public key matches the switch's client-public-key file, allow that client access to the switch. If there is not a public-key match, then deny access to that client. 6-29