HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 108
Enabling or Disabling Inbound Telnet Access, Viewing the Current Inbound Telnet Configuration
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
IPv6 Management Features IPv6 Telnet Operation Enabling or Disabling Inbound Telnet Access Syntax: [ no ] telnet-server This command is used at the global config level to enable (the default) or disable all (IPv4 and IPv6) inbound Telnet access to the switch. The no form of the command disables inbound telnet. For example, to disable IPv4 and IPv6 Telnet access to the switch, you would use this command: ProCurve(config)# no telnet-server Viewing the Current Inbound Telnet Configuration Syntax: show console This command shows the current configuration of IPv4 and IPv6 inbound telnet permissions, as well as other information. For both protocols, the default setting allows inbound sessions. ProCurve(config)# show console Console/Serial Link Inbound Telnet Setting for IPv4 and IPv6 Telnet Inbound Telnet Enabled [Yes] : Yes Web Agent Enabled [Yes] : Yes Terminal Type [VT100] : VT100 Screen Refresh Interval (sec) [3] : 3 Displayed Events [All] : All Baud Rate [Speed Sense] : speed-sense Flow Control [XON/XOFF] : XON/XOFF Session Inactivity Time (min) [0] : 0 Figure 5-5. Show Console Output Showing Default Console Configuration 5-8