HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 92
Example of Show IPv6 VLAN <, > Output
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
IPv6 Addressing Configuration View the Current IPv6 Addressing Configuration ProCurve# show ipv6 vlan 10 Internet (IPv6) Service IPv6 Routing : Disabled Default Gateway : fe80::213:c4ff:fedd:14b0%vlan10 ND DAD : Enabled DAD Attempts : 3 Vlan Name IPv6 Status : VLAN10 : Enabled IPv6 Address/Prefixlength Expiry 2001:db8:a03:e102::1:101/64 Fri May 19 11:51:15 2009 fe80::1:101/64 permanent Figure 4-3. Example of Show IPv6 VLAN < vid > Output Syntax: show run In addition to the other elements of the current configuration, this command lists the statically configured, global unicast and anycast IPv6 addressing, and the current IPv6 configuration per-VLAN. The listing may include one or more of the following, depending on what other IPv6 options are configured on the VLAN. Any stateless address autoconfiguration (SLAAC) commands in the configuration are also listed in the output, but the actual addresses resulting from these commands are not included in the output. ■ ipv6 enable ■ ipv6 address fe80::< device-id > link-local ■ ipv6 address < prefix >:< device-id >/< prefix-length > ■ ipv6 address autoconfig ■ ipv6 address dhcp full [rapid-commit] ■ ipv6 < global-unicast-address >/< prefix > anycast 4-27