HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 143
Displaying an SSH Configuration, show ip ssh, Example of an SSH Configuration Display
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
IPv6 Management Security Features Secure Shell (SSH) for IPv6 Note For both IPv4 and IPv6, the switch supports only SSH version 2. You cannot set up an SSH session with a client device running SSH version 1. For more information on how to configure SSH for encrypted, authenticated transactions between the switch and SSH-enabled client devices, refer to the "Configuring Secure Shell (SSH)" chapter in the latest Access Security Guide for your switch. Displaying an SSH Configuration To verify an SSH configuration and display all SSH sessions running on the switch, enter the show ip ssh command. Information on all current SSH sessions (IPv4 and IPv6) is displayed. ProCurve# show ip ssh With SSH running, the switch supports one console session and up to five other SSH and Telnet (IPv4 and IPv6) sessions. Web browser sessions are also supported, but are not displayed in show ip ssh output. Source IPv6 IP addresses of SSH clients are displayed in hexadecimal format. SSH Enabled : Yes TCP Port Number : 22 Host Key Type : RSA Secure Copy Enabled : No Timeout (sec) : 120 Host Key Size : 2048 Ciphers : aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc, [email protected],aes128-ctr,aes192-ctr,aes256-ctr MACs : hmac-md5,hmac-sha1,hmac-sha1-96,hmac-md5-96 Ses Type | Source IP Port 1 console | 2 ssh |10.168.31.114 1722 3 inactive | 4 inactive | 5 inactive | 6 inactive | Displays the current SSH configuration and status. The switch uses these five SSH settings internally for transactions with clients. Figure 6-1. Example of an SSH Configuration Display 6-18