HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 98
Example of Show IPv6 Routers Output, Hop Limit, Prefix Advertised, Valid Lifetime
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
IPv6 Addressing Configuration View IPv6 Gateway, Route, and Router Neighbors MTU: This is the Maximum Transmission Unit (in bytes) allowed for frames on the path to the indicated router. Hop Limit: The maximum number of router hops allowed. Prefix Advertised: Lists the prefix and prefix size (number of leftmost bits in an address) originating with the indicated router. Valid Lifetime: The total time the address is available, including the preferred lifetime and the additional time (if any) allowed for the address to exist in the deprecated state. Refer to "Address Lifetimes" on page 4-34. Preferred Lifetime: The length of time during which the address can be used freely as both a source and a destination address for traffic exchanges with other devices. Refer to "Address Lifetimes" on page 4-34. On/Off Link: Indicates whether the entry source is on the same VLAN as is indicated in the Interface field. For example, figure 4-6 indicates that the switch is receiving router advertisements from a single router that exists on VLAN 10. ProCurve(config)# show ipv6 routers IPv6 Router Table Entries Router Address : fe80::213:c4ff:fedd:14b0 Preference : Medium Interface : VLAN10 MTU : 1500 Hop Limit : 64 Valid Preferred On/Off Prefix Advertised Lifetime(s) Lifetime(s) Link 2001:db8:a03:e102::/64 864000 604800 Onlink Figure 4-6. Example of Show IPv6 Routers Output 4-33