HP 6120XG HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide - Page 123
IP Preserve for IPv6
View all HP 6120XG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
IPv6 Management Features IP Preserve for IPv6 The show snmpv3 targetaddress command displays the configuration (including the IPv4 or IPv6 address) of the SNMPv3 management stations to which notification messages are sent. ProCurve(config)# show snmpv3 targetaddress snmpTargetAddrTable [rfc2573] Target Name IP Address Parameter 1 15.29.17.218 1 2 15.29.17.219 2 PP.217 15.29.17.217 marker_p PP.218 2620:0:260:211 :217:a4ff:feff:1f70 marker_p An IPv6 address is displayed on two lines. Figure 5-9. "show snmpv3 targetaddress" Command Output with IPv6 Address IP Preserve for IPv6 IPv6 supports the IP Preserve feature, which allows you to copy a configuration file from a TFTP server to multiple switches without overwriting the IPv6 address and subnet mask on VLAN 1 (default VLAN) in each switch, and the Gateway IPv6 address assigned to the switch. To configure IP Preserve, enter the ip preserve statement at the end of the configuration file that will be downloaded from a TFTP server. (Note that you do not invoke IP Preserve by entering a command from the CLI). 5-23