HP BladeSystem bc2800 HP BladeSystem PC Blade Switch Installation Guide - Page 23

Verifying the IP and Default Gateway Addresses, User Name, SNMP Community Strings, consoleconfig

Get HP BladeSystem bc2800 - Blade PC PDF manuals and user guides View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

console(config)# ip default-gateway 192.168.1.1 console(config)# exit Verifying the IP and Default Gateway Addresses Ensure that the IP address and the default gateway were properly assigned by executing the command show ip interface and examining its output: Console# show ip interface Gateway IP Address 192.168.1.1 IP address -----------192.168.1.123/24 Activity status active Interface ---------VLAN 1 Type -----Static User Name Use a user name to manage the device remotely, for example through SSH, Telnet, or the browserbased interface. To gain complete administrative (super-user) control over the PC Blade Switch, specify the highest privilege (15). NOTE: Only the administrator (super-user) with the highest privilege level (15) is allowed to manage the PC Blade Switch through the browser-based interface. For more information about the privilege level, see the CLI Reference Guide. The configured user name is entered as a login name for remote management sessions. To configure user name and privilege level, type the command at the system prompt as shown in the configuration example: console> enable console# configure console(config)# username admin password lee level 15 SNMP Community Strings Simple Network Management Protocol (SNMP) provides a method for managing network devices. Devices supporting SNMP run local software (agent). The SNMP agents maintain a list of variables used to manage the device. The variables are defined in the Management Information Base (MIB). The MIB presents the variables controlled by the agent. The SNMP agent defines the MIB specification format, as well as the format used to access the information over the network. Access rights to the SNMP agents are controlled by access strings and SNMP community strings. The PC Blade Switch is SNMP-compliant and contains an SNMP agent that supports a set of standard and private MIB variables. Developers of management stations require the exact structure of the MIB tree and need to receive the complete private MIBs before being able to manage the MIBs. All parameters are manageable from any SNMP management platform, except the SNMP management ENWW Configuration Overview 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
console(config)#
ip default-gateway
192.168.1.1
console(config)#
exit
Verifying the IP and Default Gateway Addresses
Ensure that the IP address and the default gateway were properly assigned by executing the command
show ip interface and examining its output:
Console#
show ip interface
Gateway IP Address
Activity status
---------------------
---------------
192.168.1.1
active
IP address
Interface
Type
------------
----------
------
192.168.1.123/24
VLAN 1
Static
User Name
Use a user name to manage the device remotely, for example through SSH, Telnet, or the browser-
based interface. To gain complete administrative (super-user) control over the PC Blade Switch, specify
the highest privilege (15).
NOTE:
Only the administrator (super-user) with the highest privilege level (15) is allowed to manage
the PC Blade Switch through the browser-based interface.
For more information about the privilege level, see the CLI Reference Guide.
The configured user name is entered as a login name for remote management sessions. To configure
user name and privilege level, type the command at the system prompt as shown in the configuration
example:
console>
enable
console#
configure
console(config)#
username admin password lee level
15
SNMP Community Strings
Simple Network Management Protocol (SNMP) provides a method for managing network devices.
Devices supporting SNMP run local software (agent). The SNMP agents maintain a list of variables used
to manage the device. The variables are defined in the Management Information Base (MIB). The MIB
presents the variables controlled by the agent. The SNMP agent defines the MIB specification format,
as well as the format used to access the information over the network. Access rights to the SNMP agents
are controlled by access strings and SNMP community strings.
The PC Blade Switch is SNMP-compliant and contains an SNMP agent that supports a set of standard
and private MIB variables. Developers of management stations require the exact structure of the MIB
tree and need to receive the complete private MIBs before being able to manage the MIBs. All
parameters are manageable from any SNMP management platform, except the SNMP management
ENWW
Configuration Overview
17