HP BladeSystem bc2800 HP BladeSystem PC Blade Switch Installation Guide - Page 28

console(config-line)# enable authentication default console(config-line)# password jones console(config-line)# exit console(config)# aaa authentication login default line console(config)# aaa authentication enable default line NOTE: Use one of the following commands to generate either a DSA or RSA key pair. For more information on key generation, please see the CLI guide. console(config)# crypto key generate dsa console(config)# exit Since this method uses the Default logon, a user name is not required. When initially logging onto the PC Blade Switch through an SSH session, type jones at the password prompt. When switching to Exec mode to enable, type jones at the password prompt. NOTE: Configuring only the initial SSH password overrides the console. This means that the PC Blade Switch becomes unaccessible through the local serial console connection. Configuring an Initial HTTP Password To configure an initial HTTP password, type the following commands: console# configure console(config)# ip http authentication local console(config)# username admin password user1 level 15 Configuring an Initial HTTPS Password To configure an initial HTTPS password, type the following commands: console# configure console(config)# ip https authentication local console(config)# username admin password user1 level 15 Type the following commands once to configure a console, a Telnet, or SSH to use with an HTTPS session. console# configure console(config)# crypto certificate generate key_generate console(config)# ip https server When initially enabling an http or https session, type admin for user name and user1 for password. 22 Chapter 2 First Time Installation ENWW