HP Color LaserJet Enterprise CP4020 Service Manual - Page 372

Table 3-13 Embedded Jetdirect menu (continued) Item Sub-item Sub-item PRINT RESULTS Sub-item YES NO* EXECUTE PING RESULTS YES NO* PACKETS SENT PACKETS RECEIVED PERCENT LOST RTT MIN RTT MAX RTT AVERAGE PING IN PROGRESS YES NO* Description If the ping test was not set for continuous operation, you can choose to print the test results. Select YES to print results. If you select NO, results are not printed. Specify whether to initiate the ping test. Select YES to initiate the test, or NO to not run the test. Use this item to view the ping test status and results using the control panel display. You can select the following items: Shows the number of packets (0 - 65535) sent to the remote host since the most recent test was initiated or completed. The default is 0. Shows the number of packets (0 - 65535) received from the remote host since the most recent test was initiated or completed. The default is 0. Shows the percent (0 to 100) of ping test packets that were sent with no response from the remote host since the most recent test was initiated or completed. The default is 0. Shows the minimum detected roundtrip-time (RTT), from 0 to 4096 milliseconds, for packet transmission and response. The default is 0. Shows the maximum detected roundtrip-time (RTT), from 0 to 4096 milliseconds, for packet transmission and response. The default is 0. Shows the average round-trip-time (RTT), from 0 to 4096 milliseconds, for packet transmission and response. The default is 0. Shows whether a ping test is in progress. YES indicates a test in progress, and NO indicates that a test completed or was not run. 340 Chapter 3 Solve problems ENWW