HP Color LaserJet Enterprise CP4525 HP Color LaserJet Enterprise CP4020/CP4520 - Page 199
Table 10-1, Control-panel messages continued
View all HP Color LaserJet Enterprise CP4525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Table 10-1 Control-panel messages (continued) Description Recommended action 22 EMBEDDED I/O BUFFER OVERFLOW To continue press OK Too much data was sent to the embedded HP Jetdirect print server. Press the OK button to print the transferred data. (Some data might be lost.) Check the host configuration. If the message persists, contact HP support. See Customer support on page 246. 22 USB I/O BUFFER OVERFLOW To continue press OK The product's USB buffer has overflowed. Press the OK button to print the transferred data. (Some data might be lost.) Check the host configuration. If the message persists, contact HP support. See Customer support on page 246. 40 EIO X BAD TRANSMISSION To continue press OK The connection between the product and the EIO card in the specified slot has been broken. Press the OK button to clear the error message and continue printing. Try to reinstall the EIO card. 40 EMBEDDED I/O BAD TRANSMISSION A temporary printing error has occurred. To continue press OK Press the OK button to clear the error message. (Data will be lost.) 41.3 UNEXPECTED SIZE IN TRAY LOAD TRAY [TYPE] [SIZE] To use another tray press OK The product detected a different paper size Load the tray with the size and type of paper than expected. indicated, or use another tray. The prompt to use another tray is displayed only if another tray has paper loaded. 41.5 UNEXPECTED TYPE IN TRAY LOAD TRAY [TYPE] [SIZE] To use another tray press OK The product detected a different paper type Load the tray with the size and type of paper than expected. indicated, or use another tray if available. The prompt to use another tray is displayed only if another tray has paper loaded. 41.7 ERROR A temporary printing error has occurred. Try using different paper. To continue press OK If the error does not clear, turn the product off and then on. 48.01 TRANSFER UNIT ERROR The transfer belt has dislocated during printing. Turn product off then on. If the message persists, remove and reinstall the transfer unit. Contact HP support if the message appears after reinstalling the transfer unit. See Customer support on page 246. ENWW Interpret control-panel messages 185