HP DesignJet Z6800 Using Your Printer - Page 218
Appendix D, back on. If the problem persists, contact HP Support. See
View all HP DesignJet Z6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Table D-1 Text messages (continued) Message PDL Error: Job clipped PDL Error: memory full PDL Error: out of paper PDL Error: parsing error PDL Error: print mode error PDL Error: printing error PDL Error: virtual memory full Replace [color] cartridge Reseat [color] cartridge Update: failed. Invalid file Recommendation The image is too large for the paper or for the printer. Load larger paper if possible, or reduce the image size. Restart the printer and try resending the job; if necessary, reduce the complexity of the job. Load more paper. The print job is unintelligible to the printer. Try to recreate and resend it. Check your cable connections. The paper type or print quality specified for the job are incorrect. Change the loaded paper type or the print settings. Try sending the job again. Restart the printer and try resending the job; if necessary, reduce the complexity of the job. Replace the cartridge. See Remove an ink cartridge on page 60 and Insert an ink cartridge on page 62. Remove and reinsert the same cartridge. See Remove an ink cartridge on page 60 and Insert an ink cartridge on page 62. Make sure that you have selected the correct firmware update file. Then try again to perform the update. Under certain circumstances, a front-panel numeric error message appears. Follow the advice in the Recommendation column to resolve the error. If an error message appears on the front panel that is not included in this list, turn off the printer and then turn it back on. If the problem persists, contact HP Support. See HP Customer Care on page 185. Table D-2 Numeric error messages Error code Recommendation 26:n.01 (where n = the subject ink cartridge number) Remove the subject ink cartridge and reinstall it in the printer. If the error persists, replace the subject ink cartridge. If the problem persists, contact HP Support. See HP Customer Care on page 185. 29:01 The maintenance cartridge is not inserted correctly. Open the maintenance cartridge door on the right side of the printer, make sure that the maintenance cartridge is correctly seated, and then close the door. If the problem persists, replace the maintenance cartridge. If the problem persists, contact HP Support. See HP Customer Care on page 185. 32:1.01 A take-up reel error has occurred. Make sure that the paper is adequately taped to the take-up reel spindle core, and then make sure that the winding direction is correctly set. 32:2.01 The take-up reel can not be detected. Make sure that the take-up reel sensor cable is correctly connected. 210 Appendix D Front-panel error messages ENWW