HP DesignJet Z6800 Using Your Printer - Page 39
Load a roll onto the spindle
View all HP DesignJet Z6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Table 4-2 Supported paper types - Z6600 (continued) Paper type Paper name Scrim Banner Additional HP Paper HP Premium Matter Polypropylene Front panel name Scrim Banner HP Premium Matte Polyp Load a roll onto the spindle 1. Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving. 2. Release the spindle lock on the right-hand side. 3. Remove the first end of the spindle from the right-hand side of the printer, and then move the spindle to the right in order to extract the other end. Do not insert your fingers into the spindle supports during the removal process. The spindle has a hub at each end to keep the roll in position. Remove the blue hub at the left end to mount a new roll. The hub slides along the spindle to hold rolls of different widths. 4. Slide the lever-lock on the blue hub to the unlocked position and remove the hub (1) from the left end of the spindle. 5. Rest the roll of paper that you want to load on the loading table. The roll might be long and heavy, and you might need two people to handle it. ENWW Load a roll onto the spindle 31