HP Digital Sender Flow 8500 User Guide 1 - Page 30
Ping in Progress, Print Results
View all HP Digital Sender Flow 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Table 3-6 Jetdirect menus (continued) Menu item Sub-menu item Ping Test Sub-menu item Dest Type Ping Results Dest IPv4 Dest IPv6 Packet Size Timeout Count Print Results Execute Packets Sent Packets Received Percent Lost RTT Min RTT Max RTT Average Ping in Progress Values and Description Select the destination type for this test. IPV4 (default) IPV6 Enter the IP address for the IPv4 destination. Enter the IP address for the IPv6 destination. Specify the packet size for this test. Valid values are 64-2048, default is 64. Set the timeout value for this test. Valid values are 1- 100, default is 1. Set the count value for this test. Valid values are 0 - 100, default is 4. Yes: Print test results. No (default): Do not print test results. Yes: Execute the selected tests.. No (default): Do not execute the selected tests. Number of packets sent. Valid values are 0-65535. Number of packets received. Valid values are 0- 65535. Percent of loss. Valid values are 0-100. Valid values are 0-4096. Valid values are 0-4096. Valid values are 0-4096. Yes No 22 Chapter 3 Administration - Configure the product ENWW