HP ENVY 15-ar000 Maintenance and Service Guide - Page 35
Hard drive, to which the hard drive cable is connected, and then
View all HP ENVY 15-ar000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, cable, or screws. The hard drive bracket and screws are available using spare part number 856789-001. The hard drive cable is available using spare part number 856788-001. Description 1-TB, 7200-rpm, SATA, 9.5-mm hard drive 1-TB, 5400-rpm, SATA, 9.5-mm hard drive Spare part number 766644-005 778192-005 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 26). Remove the hard drive: 1. Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 2. Detach the hard drive cable (2) from the keyboard/top cover. (The hard drive cable is attached to the keyboard/top cover with double-sided adhesive.) 3. Remove the four Phillips PM2.0×4.6 screws (3) that secure the hard drive to the keyboard/top cover. 4. Remove the hard drive (4). Component replacement procedures 27