HP ENVY 15-ar000 Maintenance and Service Guide - Page 46

Connector board, Detach the connector board cable

Get HP ENVY 15-ar000 PDF manuals and user guides View all HP ENVY 15-ar000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Connector board NOTE: The connector board spare part kit does not include the connector board cable. The connector board cable is available using spare part number 856801-001. Description Connector board (includes audio jack and USB port) Spare part number 856792-001 Before removing the connector board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 26). 6. Remove the fan/heat sink assembly (see Fan/heat sink assembly on page 35). Remove the connector board: 1. Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect the connector board cable from the system board. 2. Detach the connector board cable (2) from the keyboard/top cover. (The connector board cable is attached to the keyboard/top cover with double-sided adhesive.) 3. Remove the two Phillips PM2.0×4.6 screws (3) and the Phillips PM2.0×3.3 screw (4) that secure the connector board to the keyboard/top cover. 4. Remove the connector board (5). 38 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Connector board
NOTE:
The connector board spare part kit does not include the connector board cable. The connector board
cable is available using spare part number 856801-001.
Description
Spare part number
Connector board (includes audio jack and USB port)
856792-001
Before removing the connector board, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
24
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
26
).
6.
Remove the fan/heat sink assembly (see
Fan/heat sink assembly
on page
35
).
Remove the connector board:
1.
Release the ZIF connector
(1)
to which the connector board cable is connected, and then disconnect
the connector board cable from the system board.
2.
Detach the connector board cable
(2)
from the keyboard/top cover. (The connector board cable is
attached to the keyboard/top cover with double-sided adhesive.)
3.
Remove the two Phillips PM2.0×4.6 screws
(3)
and the Phillips PM2.0×3.3 screw
(4)
that secure
the connector board to the keyboard/top cover.
4.
Remove the connector board
(5)
.
38
Chapter 5
Removal and replacement procedures