HP ENVY 17-k300 ENVY 17 Notebook PC ENVY 15 Notebook PC ENVY m7 Notebook PC Ma - Page 64
Optical drive connector, Remove the optical drive connector board
View all HP ENVY 17-k300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Optical drive connector NOTE: The optical drive connector and cable are included in the optical drive spare part kit. (See Optical drive on page 33 for the spare part kit information.) Before removing the optical drive connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 33). 6. Remove the base enclosure and keyboard/top cover (see Keyboard/top cover on page 36). Remove the optical drive connector board: ▲ Disconnect the cable from the ZIF connector (1), and then disconnect the optical drive connector (2) from the tabs to remove it. Reverse this procedure to install the optical drive connector board. 54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts