HP ENVY 17-k300 ENVY 17 Notebook PC ENVY 15 Notebook PC ENVY m7 Notebook PC Ma - Page 81
Fingerprint reader board (select models only), Disconnect the ZIF connector cable
View all HP ENVY 17-k300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Fingerprint reader board (select models only) Description Fingerprint reader board for use only on select HP ENVY 15 Computer Notebooks models Fingerprint reader board for use only on select HP ENVY 17 Computer Notebooks models Spare part number 763789-001 763711-001 Before removing the Fingerprint reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32), 5. Remove the optical drive (see Optical drive on page 33). 6. Remove the keyboard/top cover from the base enclosure (see Keyboard/top cover on page 36). 7. Remove the WLAN module (see WLAN module on page 50). 8. Remove the subwoofer (see Subwoofer on page 55). 9. Remove the system board (see System board on page 58). Remove the fingerprint reader board and cable: 1. Disconnect the ZIF connector cable (1) that secures the fingerprint reader to the keyboard/top cover. 2. Release the keyboard/top cover shield (2) and (3), and then remove the fingerprint reader board (4) by lifting the board. Reverse this procedure to install the fingerprint reader board and cable. Component replacement procedures 71