HP ENVY 17-k300 ENVY 17 Notebook PC ENVY 15 Notebook PC ENVY m7 Notebook PC Ma - Page 65
Subwoofer, from the system board, remove the three Phillips screws
View all HP ENVY 17-k300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Subwoofer Description Subwoofer For use only on HP ENVY 17 Notebook PC computer models Subwoofer For use only on HP ENVY 15 Notebook PC computer models Spare part number 763716-001 763788-001 Before removing the subwoofer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 33). 6. Remove the base enclosure and keyboard/top cover (see Keyboard/top cover on page 36). Remove the subwoofer: ▲ Disconnect the subwoofer cable (1) from the system board, remove the three Phillips screws (2), and then remove the subwoofer (3) by lifting it straight up. NOTE: Carefully disconnect the cable by grasping the sides of the connector. Do not pull from the cables. Reverse this procedure to install the subwoofer. Component replacement procedures 55