HP ENVY 17-k300 ENVY 17 Notebook PC ENVY 15 Notebook PC ENVY m7 Notebook PC Ma - Page 67
Hard drive, Remove the base enclosure and keyboard/top cover see
View all HP ENVY 17-k300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Hard drive Description 2.0-TB, 5400-rpm 1.5-TB, 5400-rpm 1.0-TB, 5400-rpm 1.0-TB, 5400-rpm, hybrid 750-GB, 5400-rpm 750-GB, 5400-rpm, hybrid 500-GB, 5400-rpm for use with HP ENVY 15 Notebook PC computer models Hard Drive Hardware Kit (not illustrated): For use only on HP ENVY 17 Notebook PC computer models For use only on HP ENVY 17 Notebook PC computer models Spare part number 801888-005 747375-005 778192-005 731999-005 778190-005 732001-005 778188-005 763705-001 762504-001 Before removing the primary hard drive or secondary hard drive (select models only), follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the optical drive (see Optical drive on page 33). 6. Remove the base enclosure and keyboard/top cover (see Keyboard/top cover on page 36). 7. Remove the USB connector board (see USB board on page 56). Remove the primary hard drive: ▲ Disconnect the hard drive cable from the system board (1), and then tilt the hard drive (2) and lift to remove it (3). Component replacement procedures 57