HP ENVY x2 - 15t-c000 HP ENVY x2 Detachable PC Maintenance and Service Guide - Page 43
Vibration board, Disconnect the vibration board cable from the system board
View all HP ENVY x2 - 15t-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Vibration board Description Vibration board (includes cable) Spare part number 783106-001 Before removing the vibration board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard base (see Connecting the tablet to the keyboard base on page 28). 5. Remove the rear cover (see Rear cover on page 29). 6. Disconnect the battery cable from the system board. To remove the vibration board: 1. Disconnect the vibration board cable from the system board (1). 2. Remove the tape that secure the cable to the tablet (2) that secures the board to the tablet. 3. Lift the vibration board from the tablet (3). Reverse this procedure to install the vibration board. Component replacement procedures 33