HP ENVY x2 - 15t-c000 HP ENVY x2 Detachable PC Maintenance and Service Guide - Page 58
Touch screen board, Disconnect the touch screen board cable
View all HP ENVY x2 - 15t-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Reverse this procedure to install the volume board. Touch screen board Description Touch screen board (includes cable) Spare part number 783105-001 Before removing the touch screen board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard base (see Connecting the tablet to the keyboard base on page 28). 5. Remove the rear cover (see Rear cover on page 29). 6. Remove the battery (see Battery on page 35). 7. Remove the heat sink (see Heat sink on page 38). Remove the touch screen board: 1. Disconnect the touch screen board cable (1) from the system board . 2. Disconnect the two cable from the top of the touch screen board (2)(3). 3. Remove the tape that secures the board to the tablet (4), and then remove the board (5) from the tablet. 48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts