HP ENVY x2 - 15t-c000 HP ENVY x2 Detachable PC Maintenance and Service Guide - Page 65
Display panel, WLAN module see
View all HP ENVY x2 - 15t-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Display panel NOTE: Clean bench required to assemble display components. Description Display assembly (includes display panel, bezel, touchscreen glass, touchscreen control board with cable, middle frame, power connector, screws, foam, and tape) Display panel (raw) NOTE: Clean bench required to assemble with display. Display bezel (includes bezel and touchscreen glass) NOTE: Clean bench required to assemble with display. Spare part number 783107-001 783108-001 783093-001 Before removing the display panel, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components from the tablet: ● Rear cover (see Rear cover on page 29). ● Vibration board (see Vibration board on page 33). ● Audio/SD board (see Audio/SD board on page 34). ● Battery (see Battery on page 35). ● POGO board (see POGO board on page 36). ● Display cable (see Display cable on page 37). ● Heat sink (see Heat sink on page 38). ● Hard drive (see Hard drive on page 39). ● WLAN module (see WLAN/Bluetooth combo card on page 41). ● Webcam (see Webcam on page 43). ● Speakers (see Speakers on page 44). ● Power button board (see Power button board on page 46). ● Volume board (see Volume board on page 47). ● Touch screen board (see Touch screen board on page 48). ● Antennas (see Antennas on page 49). ● System board (see System board on page 50). Component replacement procedures 55