HP ENVY x2 - 15t-c000 HP ENVY x2 Detachable PC Maintenance and Service Guide - Page 49
Hard drive
View all HP ENVY x2 - 15t-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
2. Thermal paste is used on the heat sink (1) and on the processor on the system board (2). Reverse this procedure to install the heat sink. Hard drive Component 500-GB, 5400-rpm, hybrid hard drive with 16 GB SSD 500-GB, 5400-rpm, hybrid hard drive with 8 GB SSD Hard Drive Hardware Kit (includes insulator bracket and cable) Spare part number 762179-005 775520-005 783097-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard base (see Connecting the tablet to the keyboard base on page 28). 5. Remove the rear cover (see Rear cover on page 29). 6. Remove the battery (see Battery on page 35). 7. Remove the heat sink (see Heat sink on page 38). Remove the hard drive: 1. Disconnect the hard drive cable from the system board (1). Component replacement procedures 39